best way to put stain on wood
Watch this demonstration on the best way to liven up wood furniture with stain. - always test stain on a piece of scrap wood before starting on the furniture. - so that the stain doesn’t leave blotches on the wood, always apply a thin coat of wood conditioner first, using an inexpensive brush.. To ensure that any stain penetrates and fills oak’s deep pores, apply a liberal amount of stain to the wood, then work it into the pores using a cloth in a swirling motion. afterwards remove any unabsorbed stain by rubbing a clean cloth in the direction of the grain.. When wood has absorbed all the stain it wants, the rest just sits on the surface and doesn’t like to dry. to keep this from happening you must wipe off excess stain after applying it. by the way, this isn’t some woodworking hack…the label on the can will tell you exactly how to apply stain correctly..
best way to put stain on wood
Wiping is the efficient way to apply stain. the purpose of this article is to emphasize what i’ve said in passing many times: it’s much more efficient to wipe stain onto wood with a rag than to brush it. wiping is fast, almost as fast as spraying (without the downside of having to clean the spray gun).. Here’s the best way to match wood stain. seal the wood before applying stain. photo 1: start with wood stain sealer. divide a test board into three sections. leave one section raw, wipe full-strength sealer on one section, and wipe half-strength sealer on the third section. let it dry for about an hour and sand lightly with 220-grit paper..
0 komentar:
Posting Komentar